Freemax’s Maxus 3 200W Kit is a dual-18650, sub-ohm box-mod kit built around the M Pro 3 tank and a feature-heavy chipset, often seen around $49.99 on sale. It delivers big, smooth direct-lung vapor with excellent flavor, but it’s heavy, juice-hungry at higher wattage, and not a pocket carry. It suits adult cloud chasers and at-home sessions, not low-watt minimalists or anyone wanting a truly compact setup.
Product Overview
| Device | Overall Score | Pros | Cons | Ideal For |
|---|---|---|---|---|
| Freemax Maxus 3 200W Kit | 4.3/5 | Rich flavor, stable power, clear screen | Bulky, thirsty at higher wattage, some condensation | Adult DL users who want a dual-battery sub-ohm kit |
Final Verdict
After a week of daily sessions, the Maxus 3 kit felt like a modern high-watt workhorse: the M Pro 3 tank runs dense, saturated flavor, and the mod’s output stayed steady when we pushed it into the 70–85W zone. The trade-off is size—loaded with two 18650s and a full tank, it’s more “desk, car cupholder, couch” than “jeans pocket.” Vape and nicotine products are for adults only; use isn’t recommended for minors, pregnant people, or people who don’t use nicotine, and all impressions are subjective rather than medical advice.
Who It’s For
- Adult DL vapers who want big flavor
- Users who like dual-battery runtime
- People who enjoy wattage tuning and modes
Who It’s Not For
- Anyone who needs true pocket portability
- Low-watt MTL users and nic-salt fans
- Vapers who hate frequent refills
How We Tested It
We ran the kit with the included M Pro 3 tank using both stock coils, rotating two 70/30 VG nicotine e-liquids across the same week. Each day we logged Flavor, Throat Hit, Vapor Production, Airflow/Draw, Battery Life, Leak Resistance, Build Quality, Ease of Use, and Portability, then compared notes across commute breaks, desk sessions, and a few windy outdoor pulls. We also tracked coil resistance readings, refill frequency, and how the mod behaved after repeated battery swaps and USB-C top-offs.
Our Testing Experience
Day one, I loaded two matched 18650s, filled the M Pro 3 to just under the top seal (about 4.9 mL), and started with the pre-installed 0.15Ω M1-D coil. The mod read it at 0.16Ω, so I eased in at 60W, then lived mostly at 68–72W with airflow about two-thirds open. The vapor felt warm and cushiony—dense without being sharp—and the flavor came through “layered,” especially with a fruit-custard juice where the bright top note hit first and the creamy base lingered on the exhale. Marcus (tall, heavy DL hitter, big hands) pushed longer pulls at 75W and called out how fast the coil drank liquid. Jamal (lean, always moving) liked the clear screen and button lock, but kept calling it a “bag carry,” not a pocket rig.
Midweek we swapped to the 0.2Ω 904L M2 coil; it read 0.21Ω and felt best around 78–82W. Battery life landed around a full workday of moderate use before we hit our “swap batteries” threshold, with only light condensation under the drip tip and no true leaking.
What we liked
- Thick, smooth DL texture with strong flavor
- Stable output and easy wattage tweaks
- Quick, clean top fills
Who it is best for
- Adult DL users who vape mid-to-high wattage
- At-home or desk setups with room to spare
- People who want a flexible mod+tank kit
Where it falls short
- Heavy once it’s fully loaded
- Frequent refills at 70–85W
- Airflow gets loud outdoors
Pros & Cons
| Pros | Cons |
|---|---|
| Strong flavor and dense vapor with the M Pro 3 | Not pocket-friendly once fully loaded |
| Stable power delivery across mid/high wattage | High-watt vaping burns e-liquid quickly |
| Clear TFT screen and straightforward controls | Airflow can be noisy in wind |
| Dual-18650 flexibility for longer days | More upkeep: coils, refills, battery swaps |
| Solid, grippy chassis feel in hand | Condensation cleanup is part of routine |
Details
- Price (kit): $49.99
- Device type: dual-18650 box-mod kit with sub-ohm tank
- Output range: 5–200W
- Battery: dual 18650 (not included)
- Screen: 1.06" TFT
- Tank: M Pro 3, 5 mL capacity, sliding top fill
- Coils included: 0.15Ω M1-D (pre-installed), 0.2Ω 904L M2
- Charging/connection: USB Type-C, 510 threaded connection
Review Score
| Metric | Score | Remarks |
|---|---|---|
| Flavor | 4.6 | Saturated, “layered” taste on the M Pro 3 |
| Throat Hit | 4.3 | Firm when pushed, still smooth at our sweet spots |
| Vapor Production | 4.7 | Dense DL output with plenty of headroom |
| Airflow/Draw | 4.4 | Easy to dial in; gets louder outside |
| Battery Life | 4.4 | Dual-battery days feel manageable at 70–85W |
| Leak Resistance | 4.2 | No true leaking, but normal condensation cleanup |
| Build Quality | 4.5 | Sturdy feel; nothing rattly or fragile in hand |
| Ease of Use | 4.2 | Simple in power mode; deeper modes add complexity |
| Portability | 3.6 | Better in a bag than a pocket |
| Overall | 4.3 | Big-rig performance with predictable trade-offs |
How to Choose the Freemax Maxus 3 200W Kit
If you like direct-lung pulls, enjoy tuning wattage, and don’t mind carrying a heavier kit, this one fits. The biggest decision points are: your preferred wattage (mid/high), whether you’re comfortable using external 18650s, and how often you’re willing to refill a 5 mL sub-ohm tank. If you want a single “set it and forget it” mode, stick to the straightforward power mode; if you like experimenting, the extra modes are there without getting in the way.
For rough outdoor use, the GeekVape Aegis Legend 3 Kit is a smarter pick thanks to its rugged, protection-focused design.
If you prefer a slightly more “daily driver” feel with a modern kit ecosystem, the VooPoo Drag 5 Kit is worth a look.
Limitations
The Maxus 3 kit is strong where it counts, but it’s not a “do everything” device.
- Weight and overall bulk add up fast with two 18650s and a full tank
- High-watt coils can burn through e-liquid (and coils) quickly
- Bottom-airflow tanks tend to collect condensation over time
- The light bar styling won’t be everyone’s taste
Maxus 3 Vs. Alternatives
Why choose these models
- You want a dual-18650 kit with 5–200W range and a 5 mL sub-ohm tank
- You care more about dense flavor and clouds than pocket carry
- You like a clear screen, locking, and mode options
Alternatives to consider
- GeekVape Aegis Legend 3 Kit: tougher, more outdoors-ready package
- VooPoo Drag 5 Kit: modern kit combo aimed at everyday DL use
- Vaporesso Armour Max: protective dual-battery DTL kit built around iTank 2
Pro Tips for Freemax Maxus 3 200W Kit
- Use a matched pair of 18650s and keep them “married” as a set for safer, more consistent performance.
- Start lower than your target wattage on a fresh coil, then step up in 3–5W increments until flavor and heat feel right.
- If you taste dryness at higher wattage, open airflow a bit or back down 5W before blaming the coil.
- Keep a paper towel handy for quick wipe-downs around the drip tip to manage normal condensation.
- Refill before the tank gets very low; sub-ohm coils hate being run near-empty during long pulls.
- If your flavor suddenly dulls, check for a loose coil or worn O-ring before assuming the coil is dead.
- For travel days, lock the buttons and close airflow slightly to reduce seepage from pressure/temperature swings.
- Run sweet dessert liquids a touch cooler if you want longer coil life; high heat + sweetener is a coil killer.
- If you switch flavors, do a quick rinse of the tank parts and let them dry to avoid muddy carryover.
FAQs
What wattage worked best in your testing?
With the 0.15Ω M1-D coil, I kept landing at 68–72W for warm, dense flavor without a harsh edge. The 0.2Ω M2 coil felt smoother a bit higher, around 78–82W.
Does the M Pro 3 tank leak?
We didn’t see pooling or seeping, but we did wipe light condensation from the drip tip area every couple of refills.
Is it beginner-friendly?
It’s approachable in simple power mode, but it assumes you’re comfortable handling external 18650s and keeping spare coils on hand.
Can I use a different tank?
Yes—it's a standard 510 connection, so other tanks will fit; just keep the setup balanced and choose a coil/wattage that matches your liquid.
About the Author: Chris Miller
