VOOPOO’s Argus MT 100W Starter Kit is a rugged, IP68-rated, built-in-battery box-mod kit paired with the MAAT tank for big, flavorful DL/RDL vaping without babying your gear. At $49.99, it targets outdoor and on-the-go adults who want fast USB-C charging, a lock switch, and a roomy tank, but it’s not ideal if you need ultra-light carry or true tight-MTL draws.
Product Overview
| Device | Overall Score | Pros | Cons | Ideal For |
|---|---|---|---|---|
| VOOPOO Argus MT 100W Starter Kit | 4.2/5 | IP68 durability; QS lock; big tank; strong coil lineup | Chunky feel; built-in battery; DL-leaning setup | Adults who prioritize rugged DL/RDL performance |
Final Verdict
The Argus MT landed for us as a durability-first kit that still feels modern: the QS lock makes pocket carry realistic, the MAAT tank stays consistent across refills, and Turbo mode adds snap when you want a punchier first second. The trade-off is simple: it’s a heavier kit, and the built-in battery is convenient day-to-day but less flexible long-term.
Who It’s For
- Adults who want a rugged DL/RDL kit
- People who like fast USB-C top-ups
- Anyone who values a real lock switch
Who It’s Not For
- Tight-MTL purists
- Ultralight pocket-carry shoppers
- Swappable-battery loyalists
How We Tested It
We ran the MAAT tank with TPP mesh coils across Smart, RBA, and Turbo, tracking Flavor, Throat Hit, and Vapor Production at multiple wattages. We checked Airflow/Draw by stepping the dual slots from restricted to wide open, then logged Leak Resistance during commutes, desk breaks, and outdoor sessions. Battery Life was measured by time-to-warning and recharge time over multiple cycles, alongside Build Quality, Ease of Use, and Portability. All impressions reflect subjective adult use with nicotine e-liquids; not for minors, pregnant people, or anyone who doesn’t use nicotine, and nothing here is medical advice.
Our Testing Experience
I started where this kit makes the most sense: 0.2Ω TPP-DM2 at 50W (rated 40–60W), Smart mode on, airflow half open. The first few pulls were dense and clean—fruit and light dessert flavors stayed layered instead of turning syrupy. Marcus immediately went “more power,” running a 0.15Ω coil around 72W; the ramp felt quick, and the vapor stayed stable across longer draws instead of thinning out mid-puff. Jamal carried it through a grab-and-go day with the QS lock engaged; no accidental firing in a pocket, and the covered USB-C port mattered after a dusty afternoon. Condensation still happened, but it mostly collected where it’s supposed to; a quick wipe every couple refills kept the draw from getting wet or gurgly. On mixed 45–65W use, I averaged roughly 6.5 hours before low-battery, and a 20%→100% recharge took about 67 minutes on a 5V/3A adapter.
What we liked
- Consistent, saturated mesh-coil flavor
- QS lock makes carry less stressful
- Tank performance stays steady across refills
Who it is best for
- Adults who vape DL/RDL most of the time
- Rougher daily routines (bags, trucks, job sites)
- Users who want 100W headroom without external cells
Where it falls short
- Heavier kit for pocket-first lifestyles
- Built-in battery limits “swap and go”
- Tight-MTL takes compromise
Pros & Cons
| Pros | Cons |
|---|---|
| IP68-rated chassis; crater-style condensation management; QS lock for pocket carry; strong DL/RDL output; fast USB-C charging | Hefty feel in-hand; built-in battery can’t be swapped; DL-forward tank/coil ecosystem; Turbo can feel aggressive on very sweet liquids |
Details
- Price: $49.99
- Device type: regulated box-mod kit with MAAT tank; IP68-rated, dust/water/shock resistant design
- Output: 5–100W; 0–8.5V; 0.05–3.0Ω resistance range
- Battery and charging: 3000mAh built-in; USB-C 5V/3A with covered port
- Modes: Smart, RBA, Turbo, TC (GENE.TT 2.0)
- Tank: MAAT Tank New; 6.5 mL (US); top fill; dual airflow; stainless steel + Pyrex
- Coils: compatible with TPP coil family (example ratings: DM1 0.15Ω 60–80W; DM2 0.2Ω 40–60W; DM3 0.15Ω 80–100W)
- Display: 0.96-inch screen
Review Score
| Metric | Score | Remarks |
|---|---|---|
| Flavor | 4.4 | Mesh coils stay saturated and clear |
| Throat Hit | 4.2 | Firm, tunable with airflow and wattage |
| Vapor Production | 4.5 | Strong DL output with real headroom |
| Airflow/Draw | 4.1 | Smooth for DL/RDL; not true tight-MTL |
| Battery Life | 4.0 | Solid for built-in; heavy wattage drains faster |
| Leak Resistance | 4.0 | Condensation managed well, not eliminated |
| Build Quality | 4.6 | Rugged feel, confident daily handling |
| Ease of Use | 4.2 | Smart mode helps; menus stay manageable |
| Portability | 3.7 | Carryable, but noticeably chunky |
| Overall | 4.2 | A practical “tough kit” with strong performance |
Choosing the VOOPOO Argus MT 100W Starter Kit
Pick this kit if your priorities are rugged durability, DL/RDL performance, and quick USB-C charging, and you’re fine with a built-in battery. It shines for adults who want a lock-and-go device, a large tank, and a chipset that can run simple (Smart) or fully manual (RBA). Skip it if you insist on swappable cells, tight-MTL, or a minimal carry footprint. If you want a similar work-ready vibe with an external battery, the Geekvape S100 (Solo 2) is a mainstream 100W alternative with “tri-proof” durability positioning. If you want a compact 100W kit with an included tank and a more lightweight feel, the Vaporesso Target 100 is another solid mainstream option.
Limitations
The Argus MT is built for reliability in messy real life, but it’s not a “set it and forget it” miracle—condensation still needs routine attention, and the kit’s size is the cost of its durability.
- Heavier, bulkier carry than most 100W kits
- Built-in battery means no quick swaps
- DL/RDL-first airflow and coil ecosystem
Argus MT vs Alternatives
Why choose these models
- IP68-rated build and covered USB-C for rougher days
- QS lock reduces accidental firing in pockets/bags
- 6.5 mL tank capacity cuts refill frequency
Alternatives to consider
- Geekvape S100 (Solo 2): rugged positioning with external battery flexibility
- Vaporesso Target 100: compact 100W kit with iTank ecosystem
- Geekvape L200 (Aegis Legend 2): IP68-rated dual-battery route for longer runtime
Pro Tips for the VOOPOO Argus MT 100W Starter Kit
- Start with the 0.2Ω coil around 45–55W to dial flavor before chasing max cloud.
- Prime coils thoroughly, then give the tank a few minutes after filling to avoid early dry hits.
- Use the QS lock any time it goes in a pocket or bag; treat it like a seatbelt.
- Keep the airflow slightly more open than you think—over-restricting can amplify condensation.
- Wipe the mouthpiece and chimney every couple refills; “cleaner top-end” equals better flavor.
- Empty/wipe the condensation area during normal coil changes; it prevents surprise gurgle later.
- Turbo mode is best as an occasional “kick,” not your default if you vape sweet liquids all day.
- Charge with a solid 5V/3A source and keep the port cover seated after charging.
- If you chain-vape at higher wattage, give it short breaks; it keeps the draw consistent and the coil happier.
FAQs
Is the Argus MT more MTL or DL?
It’s fundamentally a DL/RDL kit with sub-ohm coils and a tank setup that likes airflow; you can restrict it, but it won’t feel like a true tight-MTL pod.
Which coil and wattage felt best day-to-day?
For balance, the 0.2Ω coil around 45–55W gave the cleanest flavor-to-warmth ratio; the 0.15Ω coil in the low 70s delivered a warmer, heavier hit.
How do you keep the MAAT tank from getting gurgly?
Don’t overfill, keep the chimney area wiped, and clear condensation during refills; most “gurgle” showed up when we got lazy about quick cleanups.
Is it safe to pocket-carry?
Use the QS lock and keep it upright when possible; that combination reduced accidental firing risk and kept condensation from migrating.
About the Author: Chris Miller
